Cisco’s Wi-Fi 7 access points introduced new packaging, replaced plastic bags with paper, and introduced new ordering process. This particular AP is the CW9176I-RTG SKU. The RTG stands for Ready To Go. It is build to stock which means super fast shipping, 1 AP per box packaging, and mounting brackets are included with no option to customise it. This -RTG option is perfect if you just need a single AP urgently to perform an “AP on a stick” site survey for example.
Now, if you want to minimise the cardboard volume and storage space, I highly recommend you use the CW9176I-CFG SKU. It allows you to order a 10-pack (that’s 10 APs per box) and fully customise mounting hardware or even opt out from it and use your existing brackets. The CFG part stands for configurable and it is build to your order.
Where in the SKU is the regulatory domain?
It’s gone, and it’s great! Cisco’s Wi-Fi 7 APs are designed for global use. The SKU is no longer assigned to any particular region or country. Simply order an AP. It will detect its location, and set the right country code.
Is this the cloud-managed or Catalyst controller managed model?
It is whatever you want it to be. After you plug it in, claim in in your Cisco Meraki Dashboard inventory, and it will run in Meraki mode. If you don’t claim it, it will discover your Catalyst 9800 controller, and become a Catalyst lightweight access point. Same SKU, same hardware, you choose how you manage it.
You can even switch between the two modes at any point in time with no TAC support whatsoever.
Each Wi-Fi 7 AP consumes a Unified License. This license is the same for both modes. It gives you rights to either cloud-manage the AP in Cisco Meraki Dashboard, or you can join it to Catalyst 9800 controller, and manage it by Catalyst Center.
What’s in the CW9176I-RTG box?
This is the individually packaged RTG SKU, 1 AP per box.
Note the paper wrap around the AP. No more plastic bags.
Underneath the AP are the instructions, bracket, and ceiling grid clip.
Detail of the low profile AIR-AP-BRACKET-1 mounting bracket and bolts.
Detail of the AIR-AP-T-RAIL-R ceiling grid mounting clip.
Finally, there is the AP.
All Cisco Wi-Fi 7 APs ship with a white Console port cover by default. Its purpose is to prevent installers from plugging the twisted pair cable carrying Ethernet to the Console port. The cover can be removed without any extra tools.
Note: For official Cisco guidance and information, please refer to the Cisco.com data sheet and deployment guide.